Moisture Remover Powder
Problem in recycle plastic… One Solution…
At the time of Polymer processing, various problems may occur as under:
Due to moisture, the end product may have pinholes, bubble that make the final product weak.
Repeated reprocessing of plastic increase the hardness of plastic i.e.; deterioration of quality.
The final product will have less shine and luster.
More electricity is required/consumed in processing.
Frequent chocking of extruder sieve.
Best Quality Anti Moisture Powder
Due to the superfine mesh of Moisture Powder the extruder sieve doest not get choked, which directly saves time and increases production.
Coating of the powder and mixing/blending of additives increase the shelf life of Moisture Powder and reduce the dusting. This helps the labor & good housekeeping at the time of processing.
Due to extra calcium in Moisture Powder, when comes in contact with moisture, High heat is generated, this rise/increase the temperature of the mixture and reduces electricity consumption.
Give good finishing & Lustre to the final product.
Increase strength in the final product.
| Plastic Pipes | Plastic Granules |
| Plastic Tarpaulins | Plastic Drums & Tanks |
| Plastic Ropes & Casing Strips | Plastic Household Items. |
| Plastic Film & Carry bags | Plastic Masterbatch |
Technical details
| Product detail | Treated CaO coated with special dispersing polymer friendly chemicals & additives. |
| CaO Content | > 85 - 92% |
| SiO2 | < 1% |
| Mesh Size | 20 µm |
| Colour | Off white |
| pH | 12 |
Available grades :
| Royal | Future |
| Polyaddi S-1011 | Supreme |
| Shakti | Whitebull |
Package, Transportation and Storage suggestions:
- Please avoid moisture, isolation and breakage in transportation and storage.
- The product is sensitive to moisture. Make sure to use product immediately after opening bags.
- Packing : 1kg PE pouch Further packed in 25 kg PP bags. Shreegopal Polychem would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance.
